Internal Walls

Designed for Future Livings

CSRTM HebelTM is designing the long term future of Australian commercial and industrial construction with a commitment to products that are practical, versatile, environmentally responsible and durable enough to stand the test of time.

CSRTM HebelTM is Australia’s leading manufacturer of autoclaved aerated concrete (AAC), a non-toxic, lightweight masonry which has remarkable properties:

• Non-combustible

• Excellent acoustic insulation

• High thermal resistance

• Easily worked with standard tools

• Solid masonry feel

The manufacture of HebelTM AAC uses just one quarter of the raw materials needed for conventional masonry. There are no waste products produced – even the steam generated is recycled.

HebelTM has earned the prestigious, internationally recognised ‘Good Environmental Choice – Australia’ label.

The endorsement is designed as a guide to consumers who want to choose environmentally friendly products. To be able to qualify for this endorsement, a product must satisfy stringent requirements. HebelTM demonstrates a reduced environmental load of at least 30% in energy use in comparison to like products with 61% less embodied energy and 64% less Greenhouse gasses than concrete.

CSRTM Hebel is proud to have been awarded the right to display the label.

Shopping Centres

Offices/High Rise

Clubs

Hotels

Commercial/Industrial

Hospital

External Walls 125+

CSRTM HebelTM has developed external wall systems for commercial applications ranging from low rise industrial/commercial developments to high rise offices or medium density residential buildings. HebelTM panels are installed vertically or horizontally to steel or concrete structural framing as a non-loadbearing cladding.

Internal Wall 75+

Hebel internal wall systems provide a solid, slender, non-loadbearing wall for use in commercial applications such as around toilets and offices or between industrial units as a fire wall. The systems consist of 75mm, 100mm or 125mm PowerPanels connected to slabs or steel frames. HebelTM internal wall systems are installed very quickly and can provide a fire rating of up to 4 hours.

Intertenancy Wall 75

Hebel intertenancy wall systems provide cost-effective, slender walls which are quick to install. These walls with a solid masonry element provide acoustic performance that meets or exceeds BCA requirements. HebelTM intertenancy walls are primarily used for party walls as well as corridor, shaft and general internal walls in commercial construction.

Cinema Wall 125

The HebelTM Cinema Wall 125 system consists of two 125mm panels supported by a structural steel frame with insulation placed between the panels. The system meets the current requirement for acoustics for cinema operators and can be constructed quickly when compared to plasterboard and masonry wall systems currently available. The system is also able to be constructed before the roof is installed.

Spandrel Wall and Fire Tunnel

Spandrel Wall

HebelTM Spandrel Wall can be used where there needs to be a fire separation from one floor to the one above/below. The wall consists of 75mm HebelTM PowerPanelTM and steel columns at a maximum of 3m centres. The 3 metre long PowerPanelTM is equivalent in area to 22.5 concrete blocks making installation quick & easy. Significant savings in labour and construction time can be achieved for your project.

Fire Tunnel

The HebelTM Fire Tunnel system utilises the great fire characteristics of HebelTM by having the walls made of 125mm HebelTM panels supported by a steel frame and a HebelTM ceiling panel which encloses the fire tunnel. By utilising the same product to construct the walls and the ceiling and having the same contractor constructing both elements, the process is simpler and quicker than conventional methods.

PowerFloorTM 75 and 150+

CSRTM HebelTM has developed flooring systems for a wide range of commercial applications. HebelTM PowerfloorTM 75 consists of 75mm steel-reinforced panels installed over steel or timber joists to give an excellent, solid base for just about any floor covering. HebelTM PowerFloorTM 150+ is made up of steel-reinforced panels (150mm – 300mm thick) supported by a steel or concrete support frame with a ring anchor around every panel to hold it in position.

• Lightweight: lighter loads on structure can assist in reducing slabs, columns and footings.
• Cost effective: Speed of installation and reduced structural sizes means cost savings compared to masonry flooring.
• Less wastage: Greatly reduced waste as panels can be custom made to suit requirements. Fewer waste bins and less crane movements.
• Strength and security: Corrosion protected, steel-reinforced AAC panels provide a high degree of strength, durability and security.